產品詳情

水導軸承（板條整體式）

燕尾板條軸瓦靈活拼裝成對開軸承，便于安裝和維修，無需出軸，較之筒式軸承過盈安裝更可靠。檢修時如有需要，可便捷地替換板條軸瓦，也可以在一個軸承中混合或交錯裝配多種不同材料等級的均質彈塑體聚合物合金燕尾板條軸瓦，軸承達到耐磨，自潤滑，有效控制震擺的平衡。

hybron bearing can be flexibly assembled into split bearing with dovetail slat bearing bush, which is convenient for installation and maintenance without shaft extension, and more reliable when compared with the interference installation of cylinder bearing. If necessary during overhaul, the slat bearing bushes can be conveniently replaced, and a variety of homogeneous elastoplastic polymer alloy dovetail slat bearing bushes of different material grades can be mixed or staggered in one bearing, so that the bearing achieves wear resistance and self-lubricating, and effectively controls the balance of wobble.

注：

燕尾板條軸瓦材料有三個等級可供選擇，水泵默認選用白色TSTN，選用TSTN 以外材質標示為T(mén)QDS40/xxxx，后四位標示材質。板條出廠以環境溫度21~28℃，相對濕度40-60%條件下控制公差。超出此環境條件，板條尺寸有可能受環境條件影響，超出公差范圍。遇此情形，請提交測量環境條件及板條尺寸與廠家聯系確認是否合理可用。（板條最長830mm，可按需訂制）

Note:

There are three grades of dovetail slat bearing bush materials to choose from. White TSTN is selected by default for water pumps. In addition, the materials are marked with TQDS40/xxxx (the last four characters repress ent materials). Tolerance is controlled under the conditions of ambient temperature of 21-28℃ and relative humidity of 40-60% when the slats leave the factory. Beyond the environmental condition, the slat size may be affected by environmental conditions and exceed the tolerance range. In such case, please submit the conditions of measurement environment and slat size, and contact the manufacturer to confirm whether it is reasonable and available. (The maximum length of a slat is 830mm, which can be customized on demand)